Oxford Fabric Pet Mat, 18.1"L x 16.9"W x 13.6"H, Green
Pet outdoor nest - green, color: green. Material: Oxford cloth + PVC + aluminum film. Overall product size: 46 (L) * 43 (W) * 34.5 (H) cm. The front of the product has an eave and a window, the window size is 17*16cm, and the window has a PVC transparent curtain; the back of the finished product has a hole with a diameter of 14.5cm and a piece of 26*28.5cm cloth to cover the hole. The cloth has a piece of cloth and A PVC baffle of the same size, the bottom of the baffle is magnetically attracted to the product; the left and right bottoms of the product each have a button with a ground nail, and the bottom has five plastic feet; the side of the product has a cable outlet and a baffle that blocks the cable outlet; the top of the product has a 3.8c wide band around it m Velcro; the internal frame of the product is composed of fiberglass rods, the diameter of the fiberglass rods is 0.85cm, the length is 27.5cm (4 rods), 29cm (4 rods), 38cm (4 rods), the fiberglass rods are fixed on the product with Velcro, the width of the hook surface of the Velcro is 5c m, the suede surface is fixed at 3.8cm; the product comes with two floor nails with a length of 18cm and a diameter of 9mm; the product comes with a US standard heating pad of 30 (W) * 40 (L) cm. Product material: PVC (blue) + heating wire + crystal super soft cloth cover (gray). The product is 120V US standard with temperature control, and is equipped with a 180CM length full-length anti-tear hose cover power cord (with a pluggable connector, the largest diameter of the connector is 2CM - not larger than this size), the temperature control regulator needs to be near the plug; the temperature control panel can adjust the temperature and timing control (a total of 6 levels of temperature 36-55°, adjustment time 2/4/8/12/24H); Remarks: 1. A MADE IN is posted on the product CHINA label; 2. The product includes a set of bilingual instructions (printed on coated paper of 157g or more, and needs to be sent to our company for confirmation before printing).
